Cysteine combined with carbon black as support for electrodeposition of poly (1,8-Diaminonaphthalene): Application as sensing material for efficient determination of nitrite ions

Poly 1,8-Diaminonaphtahlene/cysteine (poly 1,8-DAN/Cys) combined with carbon black (CB) nanoparticles are proposed as an excellent sensor for the detection of nitrite ions. To design the electrocatalyst, a simple approach consisting on drop-casting method was applied to disperse carbon black on the surface of glassy carbon electrode, followed by the immobilization of cysteine on the surface of CB nanoparticles. The electrochemical polymerization of 1,8-Diaminonaphthalene was conducted in acidic medium by using cyclic voltammetry. The prepared hybrid material was denoted poly 1,8-DAN /Cys/CB. Several methods were used to characterize the structural and electrochemical behavior of the reported hybrid material including Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), amperometry and differential pulse voltammetry (DPV). The prepared electrode displayed an outstanding electroactivity towards nitrite ions reflected by an enhancement in the intensity of the current and a decrease of the charge transfer resistance. Poly 1,8-DAN/Cys/CB displayed an excellent sensing performance towards the detection of nitrite with a very low detection limit of 0.25 µM. Two linear ranges of 1–40 µM and 20–210 µM when using amperometry and differential pulse voltammetry (DPV) were obtained respectively. This work highlights the simple preparation of a polymeric film rich in amine and thiol groups for nitrite detection.     

直接进样电热蒸发-原子荧光光谱法快速测定蒸馏酒中镉

为了快速低成本测定蒸馏酒中痕量重金属镉,利用钨丝电热蒸发器作为直接进样装置,与原子荧光光谱仪原子化器直接连接,构建了用于蒸馏酒中镉测定的直接进样原子荧光光谱检测系统(W-coil ETV-AFS),并对工作气体的气氛和流速、灰化和蒸发电压、样品承载量等参数进行了优化,建立了蒸馏酒中镉的直接进样快速检测方法。在最优条件下,Cd的检出限(LOD)为0.06μg/L(进样量为50μL),在0.5~100μg/L线性范围内回归系数(R²)为0.997;在5μg/L水平下,9个典型蒸馏酒样品的加标回收率在86.0%~116%,相对标准偏差RSD≤8.0%(n=3)。可以直接导入样品,无需复杂的前处理过程,具有良好的灵敏度、准确度和精密度,非常适合蒸馏酒中痕量镉的快速测定。     

A comparative study on the effect of carbon fillers on electrical and thermal conductivity of a cyanate ester resin

Carbon fillers including multi-walled carbon nanotubes (MWCNTs), carbon black (CB) and graphite were introduced in a cyanate ester (CE) resin, respectively. The effects of the fillers on the electrical and thermal conductivity of the resin were measured and analyzed based on the microscopic observations. MWCNTs, CB and graphite exhibited percolation threshold at 0.1 wt%, 0.5 wt% and 10 wt%, respectively. The maximal electrical conductivity of the composites was 1.08 S/cm, 9.94 × 10⁻³ S/cm and 1.70 × 10⁻⁵ S/cm. MWCNTs showed the best enhancement on the electrical conductivity. The thermal behavior of the composites was analyzed by calorimetry method. Incorporation of MWCNTs, CB and graphite increased the thermal conductivity of CE resin by 90%, 15% and 92%, respectively. Theoretical models were introduced to correlate the thermal conductivity of the CE/MWCNTs composite. The interfacial thermal resistance between CE resin and MWCNTs was 8 × 10⁻⁸ m²K/W and the straightness ratio was 0.2. The MWCNTs were seriously entangled and agglomerated. Simulation results revealed that thermal conductivity of the CE/MWCNTs composites can be substantially elevated by increasing the straightness ratio and/or filler content of MWCNTs.     

Application of fractional calculus methods to asymmetric dynamical response of CB-Filled rubber

Frequency-sweep tests at various temperatures were conducted to study the asymmetric dynamic response of carbon black (CB) filled rubber. The master curves of storage modulus were constructed by use of time-temperature superposition (TTS), and the dynamic response of the material over a wide range of frequencies covering about 20 decades exhibits asymmetry. Based on the experimental results, the fractional Zener model and Prony series are verified to be unsuitable to reproduce the dynamicviscoelastic behavior. Therefore, a modified model by adding a spring-pot into the fractional Zener model is presented. The applicability of the modified model in describing the dynamic behavior of the CB-filled rubber is validated by the experimental results.     

利用地球上丰富的炭黑和NiS_2双助催化剂修饰提高CdS纳米片体系的可见光产氢活性(英文)

光催化产氢技术是目前解决能源和环境问题的最有潜力的方法之一,因此制备安全高效的光催化剂已成为目前的研究热点.在目前研究的各种光催化剂中,CdS光催化剂因为具有较窄的带隙(2.4 eV)和合适的导带位置,所以在可见光催化产氢领域受到广泛关注.然而,光生电子/空穴对易复合和光腐蚀作用极大地限制了CdS光催化剂的放大应用.因此,人们采用众多改性策略以提高CdS光催化剂的可见光产氢活性,其中构建CdS纳米结构和负载助催化剂被认为是最有效的方式.构建CdS纳米结构既可以缩短载流子的迁移路径,也可以减少CdS晶体中的缺陷.很多不同纳米结构的CdS光催化剂已经被开发,例如纳米线、纳米颗粒和纳米棒等.因为制备过程极为复杂繁琐,所以CdS纳米片的研究鲜见报道.本文采用乙酸鎘和硫脲为原材料,通过简单的溶剂热法合成了CdS纳米片.在CdS的各类助催化剂中,由于常用的Pt,Ag和Au等贵金属的高成本和低储量等问题严重限制了它们的实际应用,所以近年来众多非贵金属助催化剂(例如MoS_2,WS2,NiS,NiO和WC等)得到了广泛关注.由于非贵金属助催化剂存在弱电导率和低功函数等问题,影响了对光生电子的收集和利用.纳米碳材料具有极高的电导率、强可见光吸收、有效的载流子分离和较多的反应位点等优点,因此组合纳米碳材料和非贵金属助催化剂被认为是一种有效的解决方案.本文首次采用炭黑和NiS_2作为双助催化剂改性CdS纳米片,通过简单的溶剂热/沉淀两步法成功合成了廉价高效的CdS/CB/NiS_2三元光催化体系.光催化产氢性能测试表明,CdS-0.5%CB-1%NiS_2展现出最高的光催化效率(166.7μmol h~(-1)),分别是CdS NSs和CdS-1.0%NiS_2的5.16和1.87倍.X射线衍射、高分辨电子显微镜和X射线光电子能谱结果证实了CdS催化剂的片状结构,且炭黑和NiS_2成功负载在CdS纳米片表面.紫外-可见漫反射结果表明,随着炭黑和NiS_2的负载,复合催化剂的吸收边缘产生明显的红移,且对可见光的吸收增强.荧光光谱、阻抗和瞬态光电流曲线测试结果证明,炭黑和NiS_2的加入可以有效地促进光生电子/空穴对分离.极化曲线结果表明,加入炭黑和NiS_2可以降低CdS的产氢过电势,因此加速表面产氢动力学.总之,炭黑和NiS_2之间显著的协同效应极大地提高了可见光吸收,促进光生电子/空穴对分离,加速表面产氢动力学,最终得到了三元光催化体系极高的光催化产氢活性.     

Charged AdS black holes with finite electrodynamics in 4D Einstein-Gauss-Bonnet gravity

Using a modified expression for the electric potential in the context of T-duality [Gaete and Nicolini, Phys. Lett. B, 2022], we obtained an exact charged solution within the 4D Einstein-Gauss-Bonnet (4D EGB) theory of gravity in the presence of a cosmological constant. We show that the solution also exists in the regularized 4D EGB theory. Moreover, we point out a correspondence between the black hole solution in the 4D EGB theory and the solution in the non-relativistic Horava–Lifshitz theory. The black hole solution is regular and free from singularity. As a special case, we derive a class of well known solutions in the literature.     

Effect of nonlinear electrodynamics on shadows of slowly rotating black holes

In this study, we investigate the effect of nonlinear electrodynamics on the shadows of charged, slowly rotating black holes with the presence of a cosmological constant. Rather than the null geodesic of the background black hole spacetime, the trajectory of a photon, as a perturbation of the nonlinear electrodynamic field, is governed by an effective metric. The latter can be derived by analyzing the propagation of a discontinuity of the electromagnetic waveform. Subsequently, the image of the black hole and its shadow can be evaluated using the backward ray-tracing technique. We explore the properties of the resultant black hole shadows of two different scenarios of nonlinear electrodynamics, namely, the logarithmic and exponential forms. In particular, the effects of nonlinear electrodynamics on the optical image are investigated, as well as the image's dependence on other metric parameters, such as the black hole spin and charge. The resulting black hole image and shadow display rich features that potentially lead to observational implications.     

聚乙烯中炭黑含量不同测试方法的探讨

采用GB 13021《聚乙烯管材和管体炭黑含量测定(热失重法)》和热重分析仪法两种方法测定了聚乙烯中炭黑含量。对两种方法的测定结果进行了比较,结果表明,两种方法均有良好的重复性和准确度,测定结果基本一致,采用不同方法得到的测定结果间可以相互参考。     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

黑砷磷室温太赫兹探测器

由于太赫兹波与众多物质之间存在着丰富的相互作用,太赫兹技术在众多领域均有应用需求。因此,基于独特物理机制和优异材料特性的高灵敏度、便携式太赫兹探测器的研制刻不容缓。黑砷磷是一种新型二维材料,其带隙和输运特性随化学组分可调,在光电探测领域被广泛关注。目前基于黑砷磷的研究集中在红外探测方面,而对于太赫兹探测的应用未见报道。本文介绍了一种基于黑砷磷的天线耦合太赫兹探测器。实验结果表明,在探测过程中存在两种不同的探测机制,并且两者之间存在竞争关系。通过改变黑砷磷的化学组分可以定制不同的探测机制,使其达到最优响应性能。在平衡材料带隙和载流子迁移率的情况下,探测器实现了室温下对0.37 THz电磁波的灵敏探测,其电压响应度和噪声等效功率分别为28.23 V/W和0.53 nW/Hz1/2。